View Single Post
Old 04-16-2014, 10:00 PM   #18

Jrichards73's Avatar
Drives: 2011 2SS/RS Victory Red
Join Date: Aug 2011
Location: Virginia
Posts: 903
Originally Posted by The_Stache View Post
Pull out the bolt and nut on the cradle side and try and spin the bushing... I had a problem where the Loctite broke free (on both sides). The little .05oz tube per side was not enough to hold the bushing.

I bought a bottle of the stuff off amazon, cleaned up the bushings/arms and then used plenty of the Loctite 620, let it cure for 3 days. I haven't had a noise/problem since even after autox and road trips.
Awesome! I ordered the new style strut upper isolators and will order a tube of that as well and redo it all. Thanks!

Updates: BTR Stage 2 VVT Cam Kit w/Smith Brothers Trunnions, Fluidampr, RX catch can, B&M Trans pan mod, Kooks Black Headers, Borla S-tunes, Eibach Multi-Pro-R2 coilovers and Swaybars, BMR Full Bushing kit with Toe and Trailing arms, RB Rotors w/EBC Pads, GForce 1400 Axles (now on order). AVH-X5800BHS in Scosche GM5201AB.
Jrichards73 is offline   Reply With Quote