|
Figured I'd give a quick update on my cam upgrade. Ryan set me up with the phaser and timing tables, shortly after loading them threw a cel. P219B, Searched everywhere and couldn't come up with anything, developed a slight tick so pulled the valve covers and found 2 trunions #4 cyl both on the way out. Replaced the rockers while I await the trunion upgrade kit and it's been ok.
Still have some minor issues with surging and bucking a bit in the lower rpm range and slightly low vacuum but some of it may be remedied once I get the 3600 triple disc back in, hopefully this week.
Now, the important stuff, this cam pulls amazingly hard, it has tons of torque and very good throttle response and pulls hard right out of the hole and on up. If you can purchase stock in my local tire distributor, buy it, their sales are going up!!
|