|
Back to work on the cam install.
Removed cam gear and retention plate.
Notice the hex key in the tensioner.
Spin cam around 1 or 2 times to pop the lifters up into the lifter cups
Buy 5/16 dowel rods at hardware store and cut into two 2 ft lengths.
Slide into holes in front of block to prevent lifters falling.
Cam lubed up with Lucas Assembly Lube from Autozone.
__________________
 Bryan 2018 ZL1 M6
Last edited by ZO6 Bryan; 05-06-2014 at 12:56 AM.
|