|
Another big tip I just thought of is in the directions the shrink wrap tubing on the led and the tube look nice but I made the shrink wrap tubing extend past the led and towards the LEDs and wires. When it seals down its so close to the led and the tube it would be hard not to damage either. When it extends behind the led its easier to take scissors or something else to cut the shrink wrap and peel it back if you needed to replace it.
I had to do this when I switched the led from the right side to the left side of the driver panel and you might have to do it if you heat the shrink wrap and the tube isn't index right.
__________________
1000 = Order Placed (11/16/2009) RS Constraint
1100 = Preliminary Order Accepted (1/9/2010) Order # NSPHF8
2000 = Accepted by GM (1/12/2010)
2500 = Preferenced (1/12/2010)
3000 = Accepted by Production (1/13/2010) TPW = (2/8/2010)
3100 = Sequenced (1/29/2010)
3300 = Scheduled (1/29/2010)
3400 = Broadcast (1/29/2010)
3800 = Produced (2/10/2010) VIN # 2G1FG1EVXA9192608
4150 = Invoiced (2/11/2010)
4200 = Shipped (2/12/2010)
5000 = Delivered to Dealer (2/24/2010)
6000 = Delivered to Customer (3/1/2010) 
|