Quote:
Originally Posted by 11 camaro
the thing is i dont even know what to ask for this is the first time i did this and never really had to look for a bolt  |
Measure the length of the bolt (in mm) you're looking to replace. Use the diagram shown on the boltdepot.com link above to guide you. Bolt length is the distance from the bottom of the head to the end. Add 10mm to that measurement. You need an 8mm diameter, 1.25 mm pitch, ### mm long bolt; where ### is the length calculated above. Sometimes written: M8 x 1.25 x ###.
Quote:
Originally Posted by PoorMansCamaro
all else fails, buy some RTV silicone gasket maker, and use the stock bolts. I've done it on 3 LLT's so far.
|
The problem is that he's going to need a longer bolt in the rear position because the upper threads tore out. (From another thread in the LFX section).