Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

Dexman1349 · 05-29-2014, 01:05 PM

A few miscellaneous other mods I have done this spring:
Installed a Pfadt strut tower brace. I picked this up from another Camaro 5 member. It had some LED strips attached to it, but unfortunately when I was trying to figure out the wiring for the fog lights I damaged the connection to the point it wouldn't work anymore so I removed them.

I thought I'd see if I liked black side mirrors, so I Plasti-dipped them:

Installed a set of ZL1 Toe rods. I managed to find a set of take-offs from a fellow Camaro5 member for significantly cheaper than anything I could find on the aftermarket circuit, plus I like how they have the spherical bearings instead of the Urethane. Sorry, no pics for this one.

05-29-2014, 01:05 PM	#6
Dexman1349 2010 2SS/RS M6 Drives: 2010 2SS/RS M6 Join Date: Jun 2010 Location: Auckland, NZ Posts: 1,482	A few miscellaneous other mods I have done this spring: Installed a Pfadt strut tower brace. I picked this up from another Camaro 5 member. It had some LED strips attached to it, but unfortunately when I was trying to figure out the wiring for the fog lights I damaged the connection to the point it wouldn't work anymore so I removed them. I thought I'd see if I liked black side mirrors, so I Plasti-dipped them: Installed a set of ZL1 Toe rods. I managed to find a set of take-offs from a fellow Camaro5 member for significantly cheaper than anything I could find on the aftermarket circuit, plus I like how they have the spherical bearings instead of the Urethane. Sorry, no pics for this one. __________________ 2/7/2014: 419 hp, 419 tq Cosmetic: ZL1 front w/mailslot, painted stripes, powdercoated SS rims, tow hook, and full chrome delete Suspension: Pfadt subframe bushings, Pfadt rear UCA bushings, Z28 Upper control arms, Spohn trailing arms with BMR trailing arm & differential bushings, ZL1 Toe Rods and springs, Prothane radius arm inserts & steering rack bushing, Pfadt Sport front sway, FE4 conversion w/ DS rear sway, Pfadt strut brace Drivetrain: RMCR tune, CAI intake, Kooks headers, hi-flo cats & exhaust, VMAX TB, ZL1 fuel pump, LSR Tri-Ax shifter Bumblebee Racecar Build Last edited by Dexman1349; 03-07-2016 at 03:54 PM.