Originally Posted by JAustin
Well, I got back to the MyLink project this afternoon / evening, and took another crack at finishing up the install.
The first thing I did was double-check the X2 connector to the OnStar module, since the voice recognition system wasn't "hearing" me. I found that the connector wasn't firmly seated into the OnStar, and determined that the cause was the little locking / unlocking panel ... it wasn't seated firmly on the connector, so the connector wouldn't lock into the OnStar.
I seated the locking panel into the X2 connector with a pair of channel locks, plugged the X2 connector into the OnStar module until it clicked, and voila! Voice Recognition at last!
From there, I ran the video wire for the backup camera to the trunk. I don't know how difficult that job is with a coupe, but it was no fun on the convertible! Finally got it channeled through a path I was happy with.
The Step 9 video on my DVD wouldn't play, but comparing the new harness to the old, it was a pretty straightforward job removing the old one and installing the new. I installed the console, then stopped to test the USB port with my iPod, and that worked fine.
Next, I attempted to install the gauge pack, but no matter what I tried, I couldn't get it into position as is. I'm going to have to do the corner trim with my Dremel, but I decided to quit for the night, before I did any major damage (tired, sweaty & impatient at this point). At least I was able to confirm that all the gauges, the traction control switch, 12V outlet and lighting still work.
Once I've trimmed the gauge pack, I'll install it, the console side panels and rear cap, and I'll be done! (Done, that is, with the exception of the rear camera install. I'm going to drive the car a bit, and give it the oil change it now needs, before tackling that relatively minor project.
|