|
I don't know if you bought all the tools yet, but you can borrow a balancer puller from a parts store and buy a long bolt and washers from McMaster-Carr for cheap cheap to use as an installer. I think I used an M16x2x140mm bolt and about 10 1mm flat washers to push mine on most of the way, then switched back over to the stock crank bolt to torque it on, then torqued in the ARP crank bolt.
__________________
01000111011011110110111101100100001000000110110001 11010101100011011010110010000001110111011010010111 01000110100000100000011101000110100001101001011100 110010000001101111011011100110010100100001
x = ac97968bd3df8f968c8cd3df998a9c94d3df9c8a918bd3df9c 909c94df8c8a9c949a8dd3df92908b979a8ddf998a9c949a8d d3df8b968b8cd1
x = ~x
|