Hey everyone! I need a bit of help. I need someone who has an SS with stock front brembos and stock 20s to take a photo of the clearance from the back of their spokes to the caliper. PM me if you are willing to help and I can give you my cell number to send the photo to
I did alot of searching and found some pictures that were close, but not the exact overhead angle i need. To do it best, the spoke should be right over the middle of the caliper so I could see the clearance.
Here is an example of what i need:
Long story short, I want to upgrade to 6 piston CTS-v fronts, and want to see if my aftermarket rims will clear. I know the stock SS rims clear those calipers, so I want someone with the OEM 4 pots to take this photo for me so I can compare the clearance to someone with the 6 pots with SS wheels. (found someone with this setup and waiting for their photo)
I also dont have my stock rims anymore, otherwise I would check myself. In the process of looking for a local ZL1 that I can test fit my own wheel on to be sure, but I figured I would try this to see if I can draw a conclusion myself
Thanks