Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

Missouri Prowler · 08-13-2009, 03:12 PM

Thanks for the idea, I finally gave in and installed the front plate today after seeing your post. We have a 1LT/RS and the lower grill is a bit different than the SS. I installed round felt pads that are used on chairs and placed them on the lower inbd mounting holes this cleared the entire assy from the car. Then I installed the clear tubing over the zip ties where they rub against the paint. So far so good. Hope this helps others with the LT and LS's

08-13-2009, 03:12 PM	#21
Missouri Prowler Drives: 2010 Camaro, 2000 Prowler Join Date: Jul 2009 Location: Sedalia, Mo Posts: 7 View My Garage	Thanks for the idea, I finally gave in and installed the front plate today after seeing your post. We have a 1LT/RS and the lower grill is a bit different than the SS. I installed round felt pads that are used on chairs and placed them on the lower inbd mounting holes this cleared the entire assy from the car. Then I installed the clear tubing over the zip ties where they rub against the paint. So far so good. Hope this helps others with the LT and LS's