View Single Post
Old 09-28-2014, 02:12 AM   #9
Caswell239

 
Caswell239's Avatar
 
Drives: 2011 2ss/rs
Join Date: Nov 2011
Location: Canada
Posts: 1,431
Heater Core Replacement

Removal Procedure


  1. Remove the HVAC module assembly. Refer to Air Conditioning and Heater Module Assembly Removal and Installation (See: Housing Assembly HVAC\Service and Repair\Air Conditioning and Heater Module Assembly).




  1. Remove the heater core cover screws (2).
  2. Remove the heater core cover.




  1. Remove the heater core (4).
Installation Procedure





  1. Install the heater core (4).




  1. Install the heater core cover.
Caution: Refer to Fastener Caution (See: Service Precautions\Vehicle Damage Warnings\Fastener Caution).


  1. Install the heater core cover screws (1) and tighten to 1.5 Nm (13 lb in) .
  2. Install the HVAC module assembly. Refer to Air Conditioning and Heater Module Assembly Removal and Installation (See: Housing Assembly HVAC\Service and Repair\Air Conditioning and Heater Module Assembly).
Caswell239 is offline   Reply With Quote