Quote:
Originally Posted by bnorman
Sounds like a bigger issue:
1. The upgrade you mentioned previously, for which market was it for? America, Asia, Middle East or Russia, all the new ones are ver 20141015?
2. I have Torque running. Each of the Bluetooth devices in the HICES bluetooth settings, have different addresses. Figure out which one is for the dongle and then make sure that in the Torque settings it is set for the same one. (I did this the first time installing Torque until I figured out torque was looking for one address and it was not the dongle).
3. Is it a dongle from Lim or from Ebay/Amazon. I read in one of the .lib files that this unit blocks common bluetooth dongles (I always thought they were doing this to force us to buy from them. They block them by setting blocks on certain ranges of addresses)
4. Are you able to load a video here or Youtube? When you say the unit resets, do you mean it completely shuts down and restarts?
5. I have not seen the CANBUS affect the lighting, only heating and A/C controls, but is the CANBUS set to HICES?
6. Without messing with files, I will get you more specifics about the bluetooth/torque app with screen shots. The lighting thing I have never seen and you are the first I heard of with it, but I am nearly positive it has something to do with the upgrade.
|
1. america version 20141015
2. the issue is there are no devices listed under bluetooth on the radio, even when i get my phone to connect, it is not listed as a device on the radio. also, i watch lims video on torque, and how to connect the obd2. i dont have menu (wireless & network) as show in his video. when I goto the bluetooth menu and turn it on, it just searches and never finds anything.
3. No its not from lim. its a ASUS BT400.
4. I have not caught this on video, it happens about 30min after the rdio is on. Its happened 3 times to me. Maybe i'll set my gopro up on my way to work and see if i can catch it. yes when it resets its just like pushing the reset button, this started only after the upgrade was made. i never had this issue prior to the upgrade.
5. yes canbus is set to HICES. Lighting issue is fixed. it was a setting after the update the led lighting setting was turned to zero.
6. I can get torque to run and connect on my phone, so 'm starting to think you may be right about blocking certain address, and maybe this is why I dont connect?? i guess i could just break down and buy one from them, but I've had this one and wasn't using it so i thought it would work.
thanks for your input.