Please help me.
I don't know if this under the right forum, but i don't have time to keep searching. I have a 2012 LS camaro that i bought myself, first owner. When i first got the car, after like 5 months i bought 6k HIDS and put them in myself, had no problems for a year. The relay fried after a year due to rain seepage into a wire that i had to tape because it wasnt a correct fit. I got new HIDS after that from Xenonsupply.com, very nice website, sent me 1 day priority shipping if i had a problem, but the thing was, i always had a problem. My Brights didnt work at first, so they sent me an upgraded harness that let me change the connectors since the camaro factory wires might have had a different wiring set up than the harness. I got the brights to actually project up finally, but then the bulb wouldnt stay in. So i said, **** it. I took them out, i put my old stock ugly yellow bulbs back in, and then i noticed the REAL PROBLEM this post is about. I had LED front turn signals only. I noticed that my passenger side burnt out, so i went to a shop to replace it. And when i got home at night, i realized my passenger blinker and sidemarker light were solid and always on, even after my car was off. This continued for 3 days until i took out the bulbs. Since then, ive tried plugging them back in, and they stay on and solid, never turning off. I really don't want to go to the dealer or an electric shop. The shop i was at had no idea what it is. PLEASE help me. If you've had this problem please let me know what it is. I also have a rather large Subwoofer system, with a 2,000 watt amp, with a second battery in the trunk, all on my STOCK alternator. Am i pulling too much power? Is there a random electrical load going to my front right side of my car? Please help.
|