Quote:
Originally Posted by mrWizard
I have Texas Speed 1 7/8" LT headers. On the passengers side the inside of the headers are about that close to the starter. Do yours rub on the inside or outside?
|
Mine are 2" and they rub on the outside of the header on the frame...I would not recommend these...I have had problems with this rubbing and also had to replace the stock plug wires and heat shields because they hit the headers and burn through the wires. Had to go with the MSD's and bend the bottom of the boot and use a soft heat shield.
__________________
Roto-Fab CAI, Texas Speed Headers, Texas Speed X-Pipe, Texas Speed LS3-B Blower Cam, Metco 9.10" Crank Pulley, Metco 2.5 Upper Pulley, ID 850 Injectors, LPE Ported Throttle Body, Alky Control Methanol kit, E2 Catch Can, 610HP / 608 Torque.
|