Quote:
Originally Posted by Mean Green Z28
I doubt what you describe would cause shuddering. if its slightly sort, all it would do is cause a clunk sound when you first press the pedal, then be up against the bracket until you take your foot off pedal. this is why you see the little metal springs on both sides of the pad; its to center the pad and reduce noise. are the rotors drilled/slotted?
Typing fat fingered on my GS3...excuse any sfelling mitcakes
|
They clunk but its hard to notice. Its the only explanation I have for the judder, rotors were checked, and were perfect, rotors are smooth ive had drilled before and they do make noise. Used brake lube etc