Quote:
Originally Posted by LonDowell
I just picked up a set. Should be here Monday and I intend to do the install myself. Will let you know how it goes. Eibach told me they have discontinued these, but will maintain the warranties and assist with any repairs.
Did you purchase? If not, look at Amazon. I got an amazing deal...
|
Lon,
Thanks for the update on the Eibach Multi Pro R1 system. You have basically the same Camaro that I have. Mine is a 2010 2SS/RS L99 inferno orange car with only 10,000 mi. on the clock! I recently added 19 in. BBS wheels ,& now need to lower it at least 1.5 in.
Please let me know ASAP as to the quality of the system, & how well it performs. Good luck with the install. Take your time & you won't have any problems! I have installed two other systems from Pfadt Racing on my 2003 ZO6 Corvette, as well as a 2010 Camaro. The key is to READ ALL the instructions, & take your time.
Make SURE the car is on a clean LEVEL surface, block up the car, either with 2 BY 12 boards, or with concrete blocks with a 2 BY 12 board sitting on top of them. DO NOT get under the car using only jack stands!
When I installed the other two systems, I lifted the cars just high enough to remove the wheels, blocked up the car, & then had an assistant apply the brakes to remove the front wheels. Also make sure you torque ALL of the bolts to the manufactures specifications.
Feel free to contact me if you have questions on the install.
All the best,
Orange 2010 Camaro