Quote:
Originally Posted by Orange 2010 Camaro
Lon,
Thanks for the update on the Eibach Multi Pro R1 system. You have basically the same Camaro that I have. Mine is a 2010 2SS/RS L99 inferno orange car with only 10,000 mi. on the clock! I recently added 19 in. BBS wheels ,& now need to lower it at least 1.5 in.
Please let me know ASAP as to the quality of the system, & how well it performs. Good luck with the install. Take your time & you won't have any problems! I have installed two other systems from Pfadt Racing on my 2003 ZO6 Corvette, as well as a 2010 Camaro. The key is to READ ALL the instructions, & take your time.
Make SURE the car is on a clean LEVEL surface, block up the car, either with 2 BY 12 boards, or with concrete blocks with a 2 BY 12 board sitting on top of them. DO NOT get under the car using only jack stands!
When I installed the other two systems, I lifted the cars just high enough to remove the wheels, blocked up the car, & then had an assistant apply the brakes to remove the front wheels. Also make sure you torque ALL of the bolts to the manufactures specifications.
Feel free to contact me if you have questions on the install.
All the best,
Orange 2010 Camaro
|
The car in the first set of pictures has front & rear tires using 45 & 50 aspect ratio tires.
I later changed the tires to a 35 aspect ratio side wall, & now need to lower the car at least 1.5 in.
All the best,
Orange 2010 Camaro