|
Too much is never enough!
Drives: AGP TT SS [COTW] 4/20/15
Join Date: Feb 2014
Location: Toledo,OH
Posts: 4,149
|
First off welcome to C5!
As for more power.....how big is your wallet? Spend a little time and search the forums for things others have done, and mistakes they have made. Its good to know what you what as your end result before you start spending money.
Things like, if your going to go forced induction vs naturally aspirated, and if your going turbo or supercharger. That will help you determine what mods you want to get for your car.
Basic bolt-ons are simple, CAI, headers, exhaust, ported TB, under drive pulley, throttle controller, cat delete or high flow cats. Also you can do a camshaft, and/or do the heads, if you are wanting more still. You can change the size of your throttle body and even install a aftermarket manifold, but to be honest the bigger TB and manifold are really not worth it unless your trying to squeeze every little last bit of hp from your car. I am not telling you what mods to do, just letting you know whats commonly done.
As for the shops, I am not familiar with your area, I know of Wongs performance in Vancover, that's about it. I would keep asking here on C5 for people to help you out with that. I am from the East coast. There are plenty of people on here that can help you out with a good recommendation for your area.
C5 is a great resource for information on Camaro's, information on what to do, and what not to do! Take the time and search every subject you want to inquire about. You'll find your answers, and if not you can always ask. Welcome to the club and get ready to spend some money.
__________________
AGP TT kit, 54/57 Forged rotating assembly, Custom grind cam... Dual nozzle meth, ID850's, Livernois dual fuel pumps, ECS BAP, 25% UDP, 3 inch Magnaflow catback with X pipe, Mantic 9000 clutch, DSS 1000hp axles, DSS aluminum driveshaft, ZL1 rear end, solid subframe bushings, HE differential offset bushings, BMR Trailing arm, BMR toe rods, Lingenfelter LNC-2000,SJM Line Lock. 747 whp 714wtq
Build thread
http://www.camaro5.com/forums/showth...55#post8107855
|