Thread: clutch advice
View Single Post
Old 01-08-2015, 11:49 AM   #6
Steve@SNL/Monster Clutch
Account Suspended
 
Drives: 2014 SS
Join Date: Jan 2011
Location: Haslet, TX
Posts: 744
Quote:
Originally Posted by jonathanmoguel View Post
ok Camaro5,

so i have a 2010 camaro ss that puts out 431whp/428 Tq with full exhaust bolt ons and tune.

with nitrous on a 100 shot it makes 512 whp and 527tq conservatively..

the transmission failed recently(i posted on what happened to my car earlier in a previous post) ended breaking the driveshaft, shifter assembly and burning the slave cylinder. upon inspection, i saw the flywheel/ pressure plate with numerous heat spots, so a new clutch is going to go in..


the transmission is going to get rebuilt by Tick performance(good guys BTW) getting the stage 2 build, also getting a DSS Aluminum driveshaft and a MGW Shifter assembly.


i was looking at the mcleod rst twin disk, which is rated at 800tq

i also was looking at the spec stage 2 clutch which is rated at 645 tq

what options are out there for my power level and what are some good ones..
what are your opinions/experiences that you guys may offer.
If you haven't looked into them yet, check out our street twins. They offer the best of both worlds, great drive-ability and holding capacity.

http://monsterclutches.com/gen-5-cam...eet-multi-disc
Steve@SNL/Monster Clutch is offline   Reply With Quote