Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - IT LIVES! My Z/LE ZL1 + 1LE + 2SS = Z/LE ;o) LSA SC [COTW 2/09/15]

hammdo · 01-08-2015, 08:11 PM

I checked the SuperCharger pulley, which we don't change out, and it appears to also be the same type 8 rib as the tensioner so it appears that will be what is used for the 6 rib belt. I'll confirm with ADM, but @ this point, it looks like using the kits pullies are it!

SC Pulley:

Next the air bleed (steam line) and then test fitment of the SC!

-Don

01-08-2015, 08:11 PM	#144
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,709 View My Garage	I checked the SuperCharger pulley, which we don't change out, and it appears to also be the same type 8 rib as the tensioner so it appears that will be what is used for the 6 rib belt. I'll confirm with ADM, but @ this point, it looks like using the kits pullies are it! SC Pulley: Next the air bleed (steam line) and then test fitment of the SC! -Don Last edited by hammdo; 07-02-2017 at 03:36 PM.