Quote:
Originally Posted by hammdo
OK, today I pinned the pulley to the crank. You'll need to purchase a pinning kit to do this:
(Magnuson Magnacharger Crank Pin Kit Gen III/IV LS Motors)
<snip>
-Don
|
Hey Don I have been lurking here a while watching your build. Just wanted to say thanks for posting such terrific detailed instructions and pictures. I have learned a ton watching you do your stuff.
I put a TVS2300 on my L99 two years ago - took a week off between Christmas and New Years and did it. It was a blast, but really simple compared to all the prep work that you are doing. Also we only went for 6.5 lbs of boost so didn't have to pin the crank. Never really figured out what all would need to be done to pin it, so it was very interesting to see you pin yours.
Thanks again for your really helpful build thread
Pete
__________________
Dry sump LS7, cage, JPSS suspension, Wilwood brakes, fire suppression, ARH 3" headers/exhaust, Z/28 DSSV coilovers, Kirkey seats, TeamTech 6-point harnesses, 19" Forgeline GA3R, 325/30R19 Re11 tires, oil cooler, monster JPSS splitter/wickerbill, CAI, brake ducts.