Quote:
Originally Posted by ADM PERFORMANCE
Actually there are 2 marks that the tensioner mark falls between that is optimum.
The belt we sent Hammdo was for our 2.50 upper pulley kit 
On stock pulley config we usually use a 0610.His 0615 might get swapped come dyno time.These belts stretch slightly with age  |
Not a problem! This kit is AWESOME and that is such a small issue. I figured I'd just bring up the one from the kit and change it for the right one. I found 2 belts in the range and took the belt that was 102 vs 100. Thanks for clarifying on the tensioner! I only saw 'Rotate' on the tensioner...
-Don