View Single Post
Old 03-25-2015, 05:28 PM   #2
Rob@WretchedMS
 
Drives: His Wife Crazy
Join Date: Jan 2008
Location: Silas Deane Auto,CT Name: Rob Anderson
Posts: 1,789
You will need new eccentric bolts that allow more adjustment,
I can't post a link, but you can find them under the hardware section of our website.

I'm not sure what the eibach bolts are, but if they are the smaller diameter/offset bolt with the center that is off center from the bolt, no, they are horrible and will likely break

Side Note:
When you install the higher movement eccentrics in the rear, you can use the rear camber eccentric (or buy 2 more rear bolt kits) in the front for the caster adjustment after you slot the caster bolt holes.
Rob@WretchedMS is offline   Reply With Quote