[DonutSS]

Originally Posted by owhite3003

From the sounds of it, we are pretty close with our mods. I am waiting to try out the track for the first time. Any Advice? What tire Pressure did you run? Thanks, for sharing you experience.

First thing is unload all loose stuff out of your car front to back, floor mats etc. Get a box or milk crate etc for you misc stuff you might need at track and get to track early early and get in line for inspection. Take white shoe polish so you can put # on your window instead of using painters tape on the door. Air pressure, depending on morning temps I would start out at 30 cold max with stock goodyears. I started at 34 cold and topped at 40lbs at the end of last afternoon session and air temp was only 72 degrees. I will say that I didn't notice any wear or traction issues at 40lbs hot. Take your valve caps off when you get to the track, especially if they're metal. Don't overfill engine oil if anything be a half at low ... Hopefully some of the others will weigh in with their experience

Switch out dot3 brake fluid if you haven't already.