|
Daytime RUnning Lights w/Halo - Harness
I bought this Plug and Play harness from AMAZON and finally installed it today. It connects into the harness and turns on the Halo Lights with the DRL.
Works perfectly! Quick install but didn't come with any instructions. The instruction for the harness are in the description of the part but it was really simple.
1. Turn the front wheels inward to access the star screws on the wheel well liner. (turn wheel left to access the right side and right for the left side);
2. Remove the three bottom screws only;
3. Gently pull back the liner enough to fit your arm inside (I used a knife pry it from the side of the wheel well);
4. The connector on the ZL1 is located ABOVE the fog lights. It WILL NOT fit directly on the lights themselves and has a blue faceplate just like the connector;
5. Unplug the car connector and plug in the halo connector to the relay and the car connector to the back of the halo connector;
6. Re-install the screws and DONE!
It was very easy and a quick new look for around $30 bucks
Topper
|