|
battery connected with no VTC, ignition ON engine OFF, codes
P16A0 ?
acc pedal D 19.6%
acc pedal E 9.8%
command TAC 22.4
P0174 system too lean bank 2
P0102 Mass or volume airflow circuit low input
P2535 Ignition 1 Switch Circuit High Voltage (PCM)
clear codes successful but they return immediately
start engine, clear codes and they return over and over
dash readout service stabiltrak & reduced engine power also come back after code clear.
Install VTC and same as above all over no difference.
removing VTC to avoid warranty hassle and taking to dealer
Last edited by 1Canuck; 05-24-2015 at 03:58 PM.
Reason: added acc pedal & VTC voltage
|