View Single Post
Old 06-23-2015, 05:38 PM   #1
Grims8ball
 
Drives: 2011 Camaro 2SS/RS Supercharged!
Join Date: Oct 2011
Location: Arlington, TX
Posts: 7
Rocker panel help!

For a little back story first...
I bought my 2011 Synergy green Camaro with 8,200 miles. There were custom carbon fiber side skirts that were taped along the rocker panels and then screwed into the fender wells. The car was lowered by an inch when I bought it and the custom skirts fell another inch and a half. I caught one of those pesky curbs and destroyed the passenger side skirt. When I did it caused some damage to the screw mounting in the rear fender well...JUST ON THE ROCKER PANEL! I took the 1 and a half skirts off that I still had on. When I did a lot of that tape was left on my rocker panels and it looks very tacky.

I've been looking for a set to replace them with, but haven't been able to find any on the Internet or even some side skirts from a body kit that replace the panels instead of just going over. I was wondering if anyone knew where I could find some replacement rocker panels or side skirts that replace the existing ones. Or does anyone at least know of a safe way to remove what is left of the tape from the side skirts I pulled off?

The only place I've found replacement panels is at the dealership at a very high cost.
Grims8ball is offline   Reply With Quote