[jasycz28]

My Camaro had been sitting for 3 years I got it running with a jump to drive it up the lift to change the oil and at some point during the starting of the car and driving it to the lift 2 stalls over I put the drivers window half way down. After doing all the maintenance to the car I was going to wash it and the window would not go back up so I tried the passengers and it didn't move either. I opened the passenger down and the window indexed down but when I shut the door it did not index up. I checked fuse 26 in the engine bay it looked good but I swapped it with 27 and nothing changed. What else am I missing. I tried the relearning by disconnection the door harness but my DIC never told me to move the window. It is like the car doesn't know the doors are there. Also when I open the doors the light doesn't come on and it is in the correct position to come on when the door opens. The mirrors work and so the the trunk release. I just flew in from Germany I am jet lagged and losing my mind over this issue. Also I need to drive the car from OK to AZ in the next day or two.

***Just noticed that when I turn the car off and open the door the radio does not turn off.***