Quote:
Originally Posted by fbodfather
Did you 'clay' it first? If not, that's a 'must' - -as that will remove all surface contaminants.....(and there are always a lot!) Second-- go very light with the product -- does not take much and if you get it on too heavy, it will be very difficult to remove -- simply go over it with a clean wet cloth and then polish dry.
The best part? Tar and road grime come right off! (and bugs! -- better known as 'mustang crumbs'..)
|
Thanks for the tips (my main problem was probably that I used WAY too much so it was next to impossible to remove). I think what I really don't understand is how to add the polish to the applicator. Do I mix the polish with water and then soak the applicator with that, or do I just put the polish directly on the applicator and them dampen it (this is what I did, and it didn't seem to work very well).