Quote:
Originally Posted by Synner
The BK bar is very high quality, you'll like it. I did my sub belts with the rear seat bolts because I'm cheap, worked fine. Have to pull the seats to connect the inner BK lap belt hardware but it's excellent quality. An afternoon and a couple beers is all you need for the initial install. Afterwards you can pop it out in 5 minutes, 10 if you don't want to leave the upright bar that connects to the lower belt mounting point. It can rest against the side of the car, accept passengers, and be safe.
|
This bar is actually made custom by EarlyApex, but it follows B.K.'s design. Its bottom arms look to be connecting to the harness plate, so it might even be easier to remove. I was worried about the height of the harness bar; it looks a bit short to me. It is very hard to determine how it will work out, and he said it makes about 10 degrees with the stock SS seats (which is good for HANS), so I decided to give it a shot.
I am actually very excited about this. He is 3 hours driving away from me, and we'll meet up 40 minutes North of him whenever he has time (PM'ed him for today, but didn't get any response yet).
I also ordered the Profi II harnesses, so I'll see how things work out with the Recaro seats real soon; looking forward to it!