Quote:
Originally Posted by idealneil
My car has been at the dealership for 2 days
Code P0303 is cylinder 3 misfire. They have ruled out everything from computer, injectors coils plugs wires all electrical.
Service Stabiltrak would light up and check engine light flash and turn off after 20 seconds or so with a hard acceleration. But I have no loss of power.
I can reproduce this same code with a hard acceleration everytime.
They have an internalist specialist looking at it tommorow.
This is a 2ss/rs A6 23K miles
Anybody else have any answers or had similiar issues resolved on the V8?
Most of the searches I have done nobody really lets anyone know what the final problem was but I can see where others have had a similiar issue.
I did see a Service Bulletin on the head gasket but looks like it is #8 cylinder
Thanks for any information I can get.
|
what did you get for a solution.. same problem even after new spark new coilpack new rail system new injectors and even changed around the spark wires. still cylinder 3 is not working and doesnt go over 140 temp while the others land around 300