View Single Post
Old 11-01-2015, 10:33 PM   #292
hawk02
Coupe Newbie
 
hawk02's Avatar
 
Drives: '23 CT5-V BW, '21 Corvette HTC
Join Date: Jul 2011
Location: Columbus, Ohio
Posts: 3,445
Quote:
Originally Posted by camguynj View Post
On my car using Dashlogic v1.15 the exhaust at startup depends on what the setting was when it was last shutoff.

If the setting when last shut off was Power Mode/Open then it starts in FACTORY mode (open up to 1,000rpm then close until 3,000rpm then open)

If the setting when last shut off was Quiet Mode/Closed (cruise control icon lit) then it starts in Quiet Mode/Closed (cruise control icon still lit at startup)
This is how I understood it to work unless a change was made in versions after 1.15.

My issues is that when I shut the car off in power mode, it will often remain in power mode at the next start. But that's not 100% consistent. Sometimes it will start in factory mode and sometimes it will start in quiet mode.

The way I know it's still in power mode is the exhaust burping and farting from the clutch fuel cutoff during lower gear shifts is way more pronounced when the flaps are open.
__________________
hawk02 is offline   Reply With Quote