Quote:
Originally Posted by JantzenOKC
Man I hope so. Btw I got the axles in and they don't slide all the way either, about the same as yours. I feel like if I put socket and ratchet on it it would pull through but I'm not trying that until I put things back together. I'll try to double check the part numbers tomorrow.
|
So I found a source for p/n 13580684 and got one in today.
It seems to slide on both sets of splines like it should. I won't take up your page with a bunch of pics. This however is how they always have gone on when I did them on my front wheel or four wheel drives. They slide most of the way in and you torque the rest of the way down.
You of course can be the judge but the company I got the hubs you have from said the below to me.
"We have a berger Camaro here on our lot that has the 22813177 and 22813178 axle shafts on it, the hub part number I sold you is the same hub as well. I showed your pictures to one of our techs and he said it looks correct, the shaft will press into the hub as it is tightened. If you are still leary about the hubs you can always send them back for a refund. Although they are the only hubs that are shown for that application."
Let me know if you want the source for the new old stock ones(seems odd to call it NOS for a '12 Camaro) and I'll send it to you.