Quote:
Originally Posted by Apex Motorsports
Having an extra set of hands when installing headers is a good idea regardless of how experienced you are. It makes life a whole lot easier. I am not sure about TSP, but most header manufacturers include everything you need to install them. O2 extension, hardware, etc.. I would give them a call to verify. If you want to eliminate the A6 resonator Summit Racing makes a direct fit section to replace it. It is not resonated and you still have cut and weld but there is no fabrication involved. Either way, you will end up at the exhaust shop if you don't have the tools.
|
Thanks for the info! TSP has an option to add the O2 extension when you order, as well as clamps and gaskets included.
In regards to the resonator, the Summit pipe looks like it comes with clamps. The cutting is no problem, but the welding is my concern, as I'm not sure we have the stuff to do it. Would the clamps do fine or would that cause some problems?
I was thinking just clamp up to the offroad connections then to the axle-back, but I'm not positive on it.