|
I have a rough idle blower cam, 2" headers, Whipple (3.875 pulley), ID 850's, cold air, Corsa 2.5", ZL1 pump, and an ADM FPCM.
I am running 9.9 lbs at 6600 RPM with that setup and 640rwhp on 91 octane.
*If I could do the fuel pump over, or if I ever have to, I will cut a hole in the back seat sheet metal. I had to drop the whole rear-end out of the car. Good luck trying to get the evap box out without dropping the rear.
|