Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - P0011 Code thrown after VVT cam was installed.

BloodyFaizal · 03-21-2016, 12:43 AM

So here's the issue. My car recently had a 218/232 VVT Cam from Comp Cams installed in it. After getting it tuned by a renown tuner in the East Texas Area I was driving it and having a little fun going wot and what not. After about 50 miles of driving the car threw a code. I used my i2 handheld to see what the code was and it's P0011: A Camshaft Position - Timing Over - Advance or System Performance. Can anyone tell me whether this is a mechanical or tuning issue. Any help is appreciated at this point. My car hasn't touched 10k miles yet and would really appreciate the information. Thanks in advance.

03-21-2016, 12:43 AM	#1
BloodyFaizal Drives: 2015 Camaro 2SS Black Join Date: May 2015 Location: Tyler, TX Posts: 42	P0011 Code thrown after VVT cam was installed. So here's the issue. My car recently had a 218/232 VVT Cam from Comp Cams installed in it. After getting it tuned by a renown tuner in the East Texas Area I was driving it and having a little fun going wot and what not. After about 50 miles of driving the car threw a code. I used my i2 handheld to see what the code was and it's P0011: A Camshaft Position - Timing Over - Advance or System Performance. Can anyone tell me whether this is a mechanical or tuning issue. Any help is appreciated at this point. My car hasn't touched 10k miles yet and would really appreciate the information. Thanks in advance.