[hammdo]

Crap, got a P0650 -- no MIL

Basically the check engine light (or Malfunction Indicator Lamp) is not lighting up.

Digging into that, there are 3 Connectors to review:

P16 connector:

This is the connector behind the instrument panel and I'm looking at the BN/WH wire (terminal 17)

X104 connector:

This connector is on the firewall just next to the Brake Booster (by the engine)

Terminal 15 is the BN/WH wire power for the MIL

Here is its location:



X102 connector:

This is the connector that is right next to the fuse box that you slide back and open. Terminal 17 is the BN/WH wire.

Here is a pic of the X102 connector:

Location by the fuse box:



Lock slid open:



Disconnected:







Got this coming to make it easier to find where or if, there is a break in the wire or, a bad PCM/ECM...

http://www.aeswave.com/11-inch-Phil-...obe-p8557.html




-Don