|
I know this thread has mostly old posts but I just wanted to throw some things I found that helped me with troubleshooting to help anyone who installs anytime soon. Took a while but it worked.
1. Make sure that there are 3 prongs in the connector that goes from the lights to the connector where you pulled out the regular bulbs. If there's not three take a paper clip and put it in the top of the connector and bend it down.
2. Make sure all the connectors mentioned above have the two prongs pointed towards the top.
3. Not sure if this really helped or not but every time I wanted to make a change to test. I made sure that I disconnected the power wire, made the change and connected the power again to test.
Hope that helps someone.
Sent from my SM-N920T using Tapatalk
|