Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - IT LIVES! My Z/LE ZL1 + 1LE + 2SS = Z/LE ;o) LSA SC [COTW 2/09/15]

hammdo · 06-10-2016, 03:34 PM

Just a quick update:

Car has been running great, but I noticed a very small amount of oil where the MM oil cap breather is. Redid the rubber gaskets and it still continued. Looks like MM is not selling these anymore so no replacement parts.

http://www.phastekperformance.com/20...ro-mbr0003.htm

So ordered the Metco from Phasetek. No more oil anywhere. Hated to change but, I didn't want any oil anywhere...

Here is the metco installed:

Dry as a bone after 6 drive cycles.

Here is the MM breather. Oil was seeping from the relief holes and where the breather went into the oil fill -- I did replace the rubber around the base of the breather, but it still leaked from the relief holes:

-Don

06-10-2016, 03:34 PM	#679
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,709 View My Garage	Just a quick update: Car has been running great, but I noticed a very small amount of oil where the MM oil cap breather is. Redid the rubber gaskets and it still continued. Looks like MM is not selling these anymore so no replacement parts. http://www.phastekperformance.com/20...ro-mbr0003.htm So ordered the Metco from Phasetek. No more oil anywhere. Hated to change but, I didn't want any oil anywhere... Here is the metco installed: Dry as a bone after 6 drive cycles. Here is the MM breather. Oil was seeping from the relief holes and where the breather went into the oil fill -- I did replace the rubber around the base of the breather, but it still leaked from the relief holes: -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 Last edited by hammdo; 06-10-2016 at 04:07 PM.