09-13-2009, 07:26 PM
|
#10
|
|
High on "The Camaro Life"
Drives: 2010 2SS, IOM, LS3, Vortech, LG cam
Join Date: May 2009
Location: Big Sandy, MT & Yuma, AZ
Posts: 1,028
|
Quote:
Originally Posted by KFH
Hey, I had the same thing on my car. The problem is that it was not assembled correct. Jack up the car, remove the wheel, then remove the three screws and one bolt in the wheel well. Pull the bumper away from the wheel well far enough to see the tabs. One or two of the tabs are not seated properly, they need to be bent back forward to line up, and then the bumper just pops right into place. I had to fix both sides, left side had one tab bent, the right had two.
|
 I had the same problem and the above is 100% correct, that is how I fixed mine also.
__________________
"The democracy will cease to exist when you take away from those who are willing to work and give to those who are not."-Thomas Jefferson------ Going Strong at 39,250 miles
|
|
|