[J HO]

Yesterday, I was driving home from work and the display said my door was open. Next, my brake light would come on when I touched the gas. Then it went to reduce power mode and stalled at the stop sign..

After it stalled the car wouldn't try to start. I showed an ABS, BRAKE, and Service Stabilitrak light on... I waited several minutes and still wouldn't start....Luckily a man stopped with some tools. I pulled the power wire off the battery and waited a few minutes. Then re-attached the wires and the car started.

After I got the car started and continued home. The car told me to make my driver side window go up and down. I did.. However, the window wouldn't calibrate. The car drove fine.. No problems when it was running. I was at a red light turning left and decided to put my top up and try to calibrating my window. As soon as my top was up my car stalled again in the middle of a 4 lane intersection on M24 in Oxford Mi... Luckily again there was a couple guys that helped push my car to a empty parking spot downtown and guide the traffic around me.

This time I pulled the BCM and ECM fuses because I didn't have tools.. After a couple minutes again my car started and I made it home.

Later, I tried to start it again to put it in the garage and it won't start again.

I'm not showing any ECM faults. I get the ABS, BRAKE, and Service Stibiltrak light.. It also said my trunk was open and it was not... And my window would not go up.. The car doesn't even try and start.

Has anyone had anything like this happen to them? or any ideas? I'm thinking the BCM is having problems.

Any help will be appreciated...

Thanks