Hey guys! It's been awhile since I've posted anything on here. I've been pretty busy with my YouTube channel and just life in general. This forum took up a good bit of my time last year, but for a good reason. I spent months researching good mods and bad mods, what to do and what not to do, and I've learned so much about the car, so I want to thank all of you!
Here is the recent build by Andrew Weaver at Diablo Formula Racing:
Kooks 1 ⅞ LT headers (ceramic coated)
Kooks catless mid pipes
Cold Air Inductions intake
Elite Engineering catch can
Metco 2.5 upper pulley
Metco 100mm upper idler pulley
Metco solid isolator
Lingenfelter 8.66 lower pulley
ATI Harmonic Balancer
8 rib HD Green Belt
Injector Dynamics 850
NGK TR7 spark plugs
Afco Heat Exchanger
Lunati Voodoo cam
Lunati dual valve springs, pushrods, etc
3 Bolt timing gear w/ 3 bolt lock
Flex Fuel sensor for E85
The car previously put down 535rwhp/521rwtq with just headers, no cats, intake, and tune. The car now puts down 703rwhp/693rwtq on 50/50 93 octane and E85. With just 93 octane, it puts down 661rwhp/662rwtq. The transmission is also tuned. All tuning done by Jeremy Formato at Fasterproms.
I am extremely happy with the car, and I already have plans for a ported blower, thermal reduction plates, and a few other little things.
Here are the videos I did for the entire build and tune:
Day 1:
https://youtu.be/oIBragwacKw
Day 2:
https://youtu.be/d9dWXc8u7gA
Day 3:
https://youtu.be/DA60AmzrEvA
Street Tune:
https://youtu.be/LxdtbzWloQY
Dyno Tune:
https://youtu.be/xxoGQVFyJNc
Subscribe to me on YouTube for more ridiculous videos!!