Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - All 5th Gen camaro specialist your help is greatly NEEDED!!!

booneSS13 · 08-02-2016, 05:58 PM

I've spent hours on it, took it to 2 different local shops, they couldn't figure it out, I've even spent $200 on a new one assuming it got bent during the removal and reinstall of my engine, and still No luck!

It's the A/C hose. The end that goes from the compressor to the condenser. Im picking the car up from the shop because they couldn't figure it out . Im sure those of you who've done an engine swap or had to pull the motor have an idea on how this thing goes back on. I have the service manual and even it's very vague on the install.

Any advice is appreciated. It's too hot for no A/C and don't really have the money to pay the dealership unless it's my only choice.

Thanks guys

08-02-2016, 05:58 PM	#1
booneSS13 Drives: 2013 Camaro SS LS3 Join Date: Jun 2015 Location: Davenport IA Posts: 718	All 5th Gen camaro specialist your help is greatly NEEDED!!! I've spent hours on it, took it to 2 different local shops, they couldn't figure it out, I've even spent $200 on a new one assuming it got bent during the removal and reinstall of my engine, and still No luck! It's the A/C hose. The end that goes from the compressor to the condenser. Im picking the car up from the shop because they couldn't figure it out . Im sure those of you who've done an engine swap or had to pull the motor have an idea on how this thing goes back on. I have the service manual and even it's very vague on the install. Any advice is appreciated. It's too hot for no A/C and don't really have the money to pay the dealership unless it's my only choice. Thanks guys __________________ *Romans 5:8* But God demonstrates his own love for us in this: While we were still sinners, Christ died for us. -Fastlane Cold Air Intake, NPP cat back exhaust, Stainless Works LT Headers, 2r max camshaft, Stage 3 Ported Heads (Manley Stainless steel values, titanium retainers, dual valve springs, bronze guides), Wiseco Forged Pistons, K1 Forged Rods, Clevite Bearings, Factory Crankshaft, Comp Cams rocker arm trunion kit, Morel 5315 lifters, JP performance single billet timing chain, Melling oil pump, Spec stage 3+ clutch and flywheel, BMR trailing arms, Nitto 555r 305/35/20. Last edited by booneSS13; 08-02-2016 at 09:44 PM. Reason: Typo