Quote:
Originally Posted by RichSS2006
My initial install did this too. The hole was a little too tight. I also did not like the foam tape. It made it sit too high, so I removed it. I used black silicone to seal it to the hood. I also did not like the cross bracing as it warped the hood a little. I made a new underside aluminum sheet and use that to mount everything. See my post: http://www.camaro5.com/forums/showth...ternate+method
I've also used Riv-nuts to attach the rain tray.
Good luck, Rich |
Is it possible for you to have those mounts made? That's a perfect way to attach the extractor. Also did you use a dremel or an air saw?
__________________
2010 2SS/RS
Z/28 intake, NW, FAST 102, speed engineering LT's, some exhaust, ATI -10% pulley, GM flex fuel injectors, DSX flex fuel sensor, MGW shifter, HP Tuners, some suspension work, stickers and a little weight loss. 12.63 @113.53
|