Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - IT LIVES! My Z/LE ZL1 + 1LE + 2SS = Z/LE ;o) LSA SC [COTW 2/09/15]

hammdo · 09-02-2016, 09:10 PM

Started on the intercooler coolant temp sensor tonight.

I purchased the 'Aeroforce' version (1/8 NPT) and added a 3 wire connector so I could remove if needed:

I ordered this from Summit racing so I could install the sensor inline right after the reservoir:

Link to the item just in case:

https://www.summitracing.com/parts/atm-2281

I'll install these and wire up the sensor tomorrow morning. This will give me an idea of how hot the coolant is right after the intercooler brick!

-Don

09-02-2016, 09:10 PM	#765
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,709 View My Garage	Started on the intercooler coolant temp sensor tonight. I purchased the 'Aeroforce' version (1/8 NPT) and added a 3 wire connector so I could remove if needed: I ordered this from Summit racing so I could install the sensor inline right after the reservoir: Link to the item just in case: https://www.summitracing.com/parts/atm-2281 I'll install these and wire up the sensor tomorrow morning. This will give me an idea of how hot the coolant is right after the intercooler brick! -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 Last edited by hammdo; 10-12-2016 at 11:23 PM. Reason: Added link to housing for sensor