Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - IT LIVES! My Z/LE ZL1 + 1LE + 2SS = Z/LE ;o) LSA SC [COTW 2/09/15]

hammdo · 09-03-2016, 11:14 PM

Got the temp gauge installed! Nice setup, easy to do with the AeroForce (setup analog 1 as fluid temp).

Here is the brass inline housing (1/8 " NPT) fitting:

Sensor in place:

Added Thermal tape to avoid heat soak from the headers:

Custom wire harness I make to install sensor:

Gauge setup!:

Now I can see what the intercooler coolant temps (Fluid Temps) are!

I also noticed that I can turn my fans on low or high anytime I need to! Very cool feature (ZL1 options has intercooler pump AND fans!)

My dual pumps run with ignition, so its very effective to keep intercooler temps down...

Yeah!

-Don

09-03-2016, 11:14 PM	#766
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,709 View My Garage	AeroForce Intercooler Coolant Temp Sensor Install Got the temp gauge installed! Nice setup, easy to do with the AeroForce (setup analog 1 as fluid temp). Here is the brass inline housing (1/8 " NPT) fitting: Sensor in place: Added Thermal tape to avoid heat soak from the headers: Custom wire harness I make to install sensor: Gauge setup!: Now I can see what the intercooler coolant temps (Fluid Temps) are! I also noticed that I can turn my fans on low or high anytime I need to! Very cool feature (ZL1 options has intercooler pump AND fans!) My dual pumps run with ignition, so its very effective to keep intercooler temps down... Yeah! -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 Last edited by hammdo; 09-04-2016 at 01:30 AM.