Quote:
Originally Posted by kinematic11
Well, i just read all 15 pages of this post, and read most of the links to other post as well. including the forza kit. and all the mods that include splicing wires. I purchased the car used, and it came with a mild2wild installed, as i pulled the carpet back to see if the previous owner pulled the fuse and walllah! there sits a mild2wild installed.
problem, there is no remote control with the car when i purchased it form a dealer.
so, ? is, how do i use this unit?
it is supposed to be a remote control unit, and i do not have the remote. i have no idea what position it is in either?
easy option is just to remove it and "do the fuse pull' and just be loud all the time
any idea of any remotes to get and program to the unit?
thanks
David
2013 Black 1LE
|
The Mild 2 Wild unit normally comes with two remotes that transmit at 315MHz or so. The problem you are going to have is that you will be unlikely to purchase a 315MHz remote and expect it operate the mild 2 wild switch.
You can try to contract mild 2 wild and see if they can help you.
Here is what else you can do ... mild 2 wild merely resells the off-the-shelf Logisys RM-01 wireless switch.
They throw in a fuse tap and call it done. You can get the RM01 switch on Amazon. Just buy this switch with two remotes. The included remotes might just work on your existing mild to wild, but if not, you can replace your entire mild 2 wild ... just re-use the fuse tap. Match the wires up by color and you will be set.
https://www.amazon.com/Logisys-RM01-...ds=rm01+switch
If you want more flexibility and reliability, I invite you to mosey over and examine the Forza Controllers
http://www.forzacomponenti.com/index.html
Regards,
Steve