Quote:
Originally Posted by ZL W0N
I gained 40whp by doing a 93 and E85 50/50 mix. I need to upgrade my fuel pump to run 100% E85, but my ID850 injectors are just fine. Currently at 703whp/693wtq on E85/93
|
We make almost the exact same power. I had my tuner check my 950 CC injectors at wot and they were running static at 110 percent. Sometimes people don't check that particular PID while programming so I would just be curious if your programmer did or did not. It just seems that those injectors have to be completely maxed out at that power level. Usually you only want your injectors to max out at 80% of their capacity. Especially if you don't mix the fuel exactly 50-50 and run E85 directly it will use a lot more fuel than the mixed, and could run lean. And lean has bad results. Just a suggestion from my experience. Ted Janetty can comment as well.