Quote:
Originally Posted by Rainbow1616
No it does not look correct.
First don't use the power antenna lead to power your camera. That is meant for only a power antenna. This lead won't be hot all the time on most radios. They are smart enough to know that when playing your ipod or cd you don't need an antenna.
Why do you have a power wire going to your splitter? I would use an rca switch there not a splitter. Keep the 2 video signals isolated.
You just seem to be making that way to complicated.
Put your front camera on a switched hot wire and change the video A/B switch with your toggle switch
|
I did not find a simple RCA splitter that I can toggle A/B. My Toggle switch is to provide power to the front camera when I want it on, that has to also trigger the Orange/White reverse input on the head unit to automatically turn the image on the screen. The Rear camera will not be on unless it's in reverse, which is why I put the one way diode to keep power from going back in the computer of the car. Now if it's in reverse and I have the toggle on, then it will just have no picture until I turn one off. Maybe I am making it too hard, but even with a RCA switch I would then need two switches, one for RCA and one for power correct?
I know I could simply put the front camera on the AUX input, but then to get to it I have to change the radio 3-4 times to get to and back from the camera. Rather just flip a switch.