[Stewart]

* Fuse #11 will turn lights on when car is running and off
when not.

* Used a 10amp fuse for lights (probably over kill).

* After making connection of positive wire from light to the add a circuit
use "shrink tube" on the connection.

* There are 2 additional 10mm bolts not pictured that are needed to be
removed from cover to remove it.

* The torque screws that are circled on plate do not need to be removed
as they are for hood height adjustment, just be careful when removing
not to scratch your paint.

* I grounded the lights to the closest bolt that secures the top of radiator
to car.